THORLABS SPCM A Series, Руководство по эксплуатации

Страница: 56 / 61

54
SPCMxxA
© 2019 Thorlabs
6.6 Certifications and Compliances
Category Standards or description
EC Declaration of Conformity - EMC
Meets intent of Directive 2004/108/EC
1
) for Electromagnetic Compat-
ibility. Compliance was demonstrated to the following specifications as
listed in the Official Journal of the European Communities:
EN 61326:2006 EMC requirements for Class A electrical equipment for measurement,
control and laboratory use, including Class A Radiated and Conducted
Emissions
2,3,4
) and Immunity.
2,3,4
)
IEC 61000-4-2 Electrostatic Discharge Immunity (Performance criterion B)
IEC 61000-4-3 Radiated RF Electromagnetic Field Immunity (Performance criterion
A)
IEC 61000-4-4 Electrical Fast Transient / Burst immunity (Performance criterion B)
FCC EMC Compliance Emissions comply with the Class A Limits of FCC Code of Federal
Regulations 47, Part 15, Subpart B
2,3,4
).
EC Declaration of Conformity - LVD Compliance was demonstrated to the following specification as listed
in the Official Journal of the European Communities: Low Voltage Dir-
ective 2006/95/EC
5
)
EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control
and laboratory use.
UL 61010-1 2
nd
ed.
Safety requirements for electrical equipment for measurement, control
and laboratory use.
CAN/CSA C22.2 No. 61010-1 2
nd
ed.
Safety requirements for electrical equipment for measurement, control
and laboratory use.
IEC 61010-1:2001 Safety requirements for electrical equipment for measurement, control
and laboratory use.
Equipment Type Test and measuring
Safety Class Class I equipment (as defined in IEC 60950-1:2001)
1
) Replaces 89/336/EEC
2
) Compliance demonstrated using high-quality shielded interface cables.
3
) Emissions, which exceed the levels required by these standards, may occur when this equipment is connected to
a test object.
4
) Minimum Immunity Test requirement.
5
) Replaces 73/23/EEC, amended by 93/68/EEC.