THORLABS PICO D, Руководство пользователя

Страница: 39 / 48

39
APPENDIX A - Model description Technical Spec.
PICO D is a continuous tunable external cavity laser. The unit is self-sustained with
respect to laser power, wavelength and temperature control electronics. However,
an external DC power supply is required to operate the laser. The PICO D is con-
trolled through its interface, having both analog (control) and digital (control and
status) signals, and requires external driver electronics for selecting output wave-
length and laser power. In order to obtain a linear behavior of the wavelength and
power control signal, they have to be externally calibrated.
PICO E can generate light in the wavelength ranges as stated below (see Specifica-
tion number 1). Specifications are given after one-hour warm-up. The PICO D can
be used before the warm up time but with limited optical specifications.
No Parameter Min Typical Max Comment
1
Tuning Range (nm)
CL Band
1519 – 1630*
The wavelength range
given by -10 and 10 V
wavelength tuning input
voltage.
(*See comment in section
4.1.1)
2 Mode hops 0
At 0 dBm (±0.2 dB) output
power applying a sweep
mode. (See figure in
section 4.1.2)
3
Tuning speed continuus
(nm / s)
0-100 0-130
4
Tuning speed, 1 nm
10 nm
100 nm
step
30ms
100ms
800ms
50 ms
150 ms
1 000
ms
Including rise and settling
time
5
Wavelength Resolution
(pm)
0.6 1
Dependent of customer
interface
6
Wavelength Repeatability
(pm)
1 2
7
Absolute Wavelength
Accuracy (pm)
±10
Dependent of customer
interface
8
Wavelength Stability over
1 hour (pm)
±2
Constant temperature
(±0.5°C) without
wavelength locker
9
Optical Output Power
(dBm over 50 nm)
2 10
See section 4.1.3 for
more details
concerning Pmax
10
Optical Output Power
(dBm over tuning range)
0 > 2 4
11
Minimum output power
(dBm)
-3 * -10
*Lower power available at
limited performance
12 Power resolution ( W) 0.1
13
Power Stability (1 hour)
(dB)
±0.02
Constant temperature (±
0.5°C)