THORLABS OCT-LK2(-BB), Руководство пользователя

Страница: 20 / 32

OCTG Series Scanner Chapter 5: Description
Page 16 MTN004419-D02
5.3.3. OCT Scan Lens Kit (Accessory)
The OCT scan lens kit from Thorlabs are specially designed accessories to support telecentric scanning over
a wide range and to compensate the dispersion mismatch of the scanner. The OCT-LKx are fully compatible
with the OCTG.
If you ordered a scan lens kit and reference adapter with the OCTG, these items are pre-installed.
If not already installed the installation procedure follows these three steps.

Insert the included OCT scan lens by screwing it in,

Inserting the illumination module

Secure the illumination module using the four included M2.5x6 cap screws
Figure 14 Installation of Scan Objective and Illumination

Another part of the lens kit is the dispersion compensation set. This has to be inserted into the
reference adapter OCT-RAx
Figure 15 Dispersion Compensation Set
ATTENTION
Optics are sensitive components!
When handling the objective lens take care to avoid touching or harming the optical surfaces.
Changing the objective of the OCTG requires changing the probe configuration data in the software package
ThorImage OCT as well.
This is performed automatically using the calibration procedure built-in the ThorImage OCT Software package
version 4.1.4 and higher. A detailed description of this procedure is given in the ThorImage OCT Operating
Manual.