Rev 24 Oct 2018
Page 5
Chapter 2
Safety
Chapter 2
Safety
2.1
Safety Information
For the continuing safety of the operators of this equipment, and the protection of the
equipment itself, the operator should take note of the
Warnings, Cautions
and
Notes
throughout this handbook and, where visible, on the product itself.
The following safety symbols may be used throughout the handbook and on the
equipment itself.
2.2
General Warnings
Warning: Risk of Electrical Shock
Given when there is a risk of injury from electrical shock.
Warning
Given when there is a risk of injury to users.
Caution
Given when there is a risk of damage to the product.
Note
Clarification of an instruction or additional information.
Warning: Risk of Electrical Shock
The piezo actuators in this product use high voltages and up to 75V may be
present at the SMC connectors. This is hazardous and can cause serious
injury. Appropriate care should be taken when using this device.
Persons using the device must understand the hazards associated with using
high voltages and the steps necessary to avoid risk of electrical shock.
Warning
If the device is used in a manner not specified by Thorlabs, the protective
features provided by the product may be impaired. In particular, excessive
moisture may impair operation.
Spillage of fluid, such as sample solutions, should be avoided. If spillage does
occur, clean up immediately using absorbant tissue. Do not allow spilled fluid to
enter the internal mechanism.