LDM9T
Chapter 2: Safety
Page 2
15827-D02
Safety
WARNING
Make sure the laser diode is installed correctly and the polarity switches on the
mount are set as per the laser diode pin configuration provided by the
manufacturer. Connecting the LD driver to mount with incorrect installation may
damage the laser diode.
WARNING
The RF input is directly coupled to the laser. Any excessive transients or noise
will be coupled into the laser and may cause the laser to be overdriven. Also,
the laser can be easily overdriven if excessive RF power is applied to this input.
Use the RF modulation input with care to avoid damaging your laser or mount.
