THORLABS LDM9LP, Руководство по эксплуатации

Страница: 21 / 28

Pigtailed Laser Mount Chapter 8: Specifications
Rev C, September 5, 2018 Page 19
Specifications
Performance Specifications
Lasers Supported Thorlabs LPS, LPS-PM, and LPM Series
Maximum Laser Current
1 A
Laser Pin Configurations A, B, C, D, E, G, H (Figure 1)
RF Modulation Frequency (Modulate
low frequencies through LD Controller)
>200 kHz
RF Input Impedance 50 Ω
Maximum RF Power
500 mW
Maximum TEC Current 4.5 A
Maximum TEC Voltage 3.0 V
TEC Heating/Cooling Capacity 7 W (Mounted to 12" x 12" Breadboard)
Typical Temperature Range (LD
Dependent) 0 to 70 °C
-10 to 70 °C (Mounted on 12" x 12"
Breadboard)
Temperature Sensor
10 k Ω NTC Thermistor, ±1% at 25°C, β =
3988
Physical Specifications
Laser Polarity Select External Slide Switch
Photodiode Polarity Select External Slide Switch
Laser Interface DB9 Female
TEC Interface DB9 Male
RF Input Connector SMA Jack
Interlock Connector 2.5 mm Phono Jack
Indicators LD Enabled (Green LED)
Size (L x W x H) 4.48” x 3.5” x 2.1”
Weight 550 grams