THORLABS LDCCM, Руководство пользователя

Страница: 3 / 13

Microscope and Tablet Mount Kit Chapter 1: Description
Rev A, November 2, 2018 Page 1
Chapter 1 Description
1.1. Introduction
The LDCCM kit enables users of Thorlabs' LDC401 or LDC401A Large-Diameter
Fiber Cleavers to view a magnified image of the fiber, micrometer backstop, and
cleave blade on their tablet controller screen. It includes a USB microscope
camera mounted on a swing-arm assembly which makes it easy to position the
camera over the fiber or move it out of the way. It also includes a mast with a USB
hub, which makes it possible to mount the tablet controller above the cleaver and
use the tablet controller as a display for the camera (as well as a controller for the
cleaver).
1.2. Parts Checklist
When unpacking the LDCCM for the first time, check to be sure that you have the
following:

Camera

Swing Arm Assembly

Tablet Mast

Data Cable (Short USB Cable, Type A to Type B)

Power Cable (USB Cable, Type A to Micro-B)

Four 4-40 x 1/4" Screws and Two 4-40 x 5/8" Screws (3/32" Hex)
If you are missing any of the above or need replacements, please contact
techsupport@thorlabs.com.
System Components