THORLABS KIM101 Скачать руководство пользователя страница 5

Страница: 5 / 59

Rev D Mar 2020

Page 2

Chapter 1 Introduction

this with the user friendly apt™ software (supplied) allows the user to very quickly get

up and running with complex move sequences in a short space of time. Advanced

custom motion control applications and sequences are also possible using the

extensive ActiveX® programming environment also supplied. This programming

library is compatible with many development tools such as LabView, Visual Basic,

Visual C++, C++ Builder, LabWindows/CVI, Matlab and Delphi.
In the remainder of this handbook, operation of the unit is described for both front

panel and PC operation. Tutorial sections (Chapter 4 and Chapter 5) provide a good

initial understanding on using the unit and reference section (Chapter 6) covers all

operating modes and parameters in detail.

1.2 Power Options

For power, a single way wall plug supply (KPS101) is available for powering a single

K-Cube Driver.

Caution

Due to the nature of its design, and its non-linear high frequency switching, the

KIM001 unit is not compatible with the KCH301 and KCH601 hubs. Use only

the KPS101 power supply unit.

Caution

Do not use a power supply with damaged, cracked or split wires. In such cases,

the supply could still power up the cube, but the integrity of the ground return

may be compromised. This could result in a hazardous live voltage being

generated.
Any obvious signs of damage to the power supply lead should result in

immediate replacement of the PSU.

Содержание KIM101




























































Результаты поиска

Содержание KIM101

Отзывы:

Похожие инструкции для KIM101

Бренды по названию

Популярные бренды

THORLABS KIM101, Оригинальное руководство пользователя

Результаты поиска

Содержание KIM101

Отзывы:

Похожие инструкции для KIM101

Бренды по названию

Популярные бренды