Page 25
ETN040053-D02
K-Cube Inertia Piezo Motor Driver
4.4.4 Menu Option - Set Velocity
This option is used to set the max velocity for a
specific channel when a move command is initiated
via the GUI panel or via software. It is not applicable
to moves initiated by the joystick (see Section 6.3.2.).
The piezo motor moves by ramping up the drive
voltage to the value set in the Peak Voltage
parameter (see Section 4.4.10.)
and then dropping
quickly to zero. This cycle is then repeated (see Fig.
6.3).
The velocity is specified in cycles/sec, in the range 1
to 2,000.
Press the MENU button, then use the joystick to scroll
through the menu options.
Press the MENU button to enter the Set Velocity
option.
Use the joystick to select the appropriate channel, then
press the MENU button to select the channel
Use the joystick to adjust the velocity, in the range 1 to
2,000 cycles/sec.
Press the MENU button to save the setting and return
to the main operating display.
MENU
MENU
K I M 1 0 1
K I M 1 0 1
E n a b l e d A x i s C H 1
C h 1 _ X 1 + 0
C h 2 _ Y 1 + 0
C h 3 _ X 2 + 0
C h 4 _ Y 2 + 0
E n a b l e d A x i s C H 1
C h 1 _ X 1 + 0
C h 2 _ Y 1 + 0
C h 3 _ X 2 + 0
C h 4 _ Y 2 + 0
M e n u o p t i o n s
U s e j o y s t i c k
K I M 1 0 1
M e n u o p t i o n s
3 S e t V e l o c i t y
K I M 1 0 1
S e t V e l C h 1
t o S e l e c t C h
K I M 1 0 1
K I M 1 0 1
C h 1 5 0 0
t o s e t V e l
MENU
