THORLABS DRV001 Скачать руководство пользователя страница 8

8

HA0149T Rev 7 Feb 2015 

Chapter 4

Regulatory

4.1

Declarations Of Conformity

4.1.1

For Customers in Europe

In accordance with the following Directive(s):
2006/42/EC  Machinery Directive (MD)
2004/108/EC  Electromagnetic Compatibility (EMC) Directive
2011/65/EU  Restriction of Use of Certain Hazardous Substances (RoHS)

this equipment has been tested and is in conformity with the applicable requirements

of the following documents:
EN  ISO 12100 Safety of Machinery. General Principles for Design, Risk Assessment

and Risk Reduction 2010
EN 61326-1  Electrical Equipment for Measurement, Control and Laboritory Use -

EMC Requirements 2013

4.1.2

For Customers In The USA

This equipment has been tested and found to comply with the limits for a Class A

digital device, persuant  to  part  15  of  the  FCC  rules.  These  limits  are  designed  to

provide reasonable protection against harmful interference when the equipment is

operated  in  a c ommercial  environment.  This  equipment  generates,  uses  and  can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction  manual,  may  cause  harmful  interference  to  radio  communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.
Changes  or  modifications  not  expressly  approved  by the  company  could  void  the

user’s authority to operate the equipment.

Содержание DRV001













Отзывы: