THORLABS DC4104, Руководство по эксплуатации

Страница: 46 / 56

© 2018 Thorlabs 44
DC4104
6.8 Certifications and Compliances
Category Standards or description
EC Declaration of
Conformity - EMC
Meets intent of Directive 2004/108/EC
1
for Electromagnetic Compatibility. Compliance
was demonstrated to the following specifications as listed in the Official Journal of the
European Communities:
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use
– EMC requirements:
Immunity: complies with basic immunity test requirements
2,3
.
Emission: complies with EN 55011 Class B Limits
2,3,4
.
IEC 610003-2 and IEC 61000-3-3.
IEC 61000-4-2 Electrostatic Discharge Immunity (Performance Criterion B)
IEC 61000-4-3 Radiated RF Electromagnetic Field Immunity (Performance Cri-
terion A)
5
IEC 61000-4-4 Electrical Fast Transient / Burst Immunity (Performance Criterion
B)
IEC 61000-4-5 Power Line Surge Immunity (Performance Criterion A)
IEC 61000-4-6 Conducted RF Immunity (Performance Criterion A)
IEC 61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations Immunity
(Performance Criterion A / C
6
)
IEC 61000-3-2 AC Power Line harmonic Emissions
IEC 61000-3-3 Voltage Fluctuations and Flicker
FCC EMC Compli-
ance Emissions comply with the Class B Limits of FCC Code of Federal Regulations 47,
Part 15, Subpart B
2,3,4
.
EC Declaration of
Conformity - Low
Voltage Compliance was demonstrated to the following specification as listed in the Official
Journal of the European Communities:
Low Voltage Directive 2006/95/EC
7
EN 61010-
1:2001 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use - Part 1: General Requirements
U.S. Nationally Re-
cognized Testing Lab-
oratory Listing
UL 61010-1 2
nd
ed.
ISA-82:02.01 2
nd
ed.
Canadian Certification CAN/CSA C22.2
No. 61010-1 2
nd
ed.
Additional Compli-
ance IEC 61010-
1:2001
Equipment Type Test and Measuring
Safety Class Class I equipment (as defined in IEC 60950-1:2001)
1
Replaces 89/336/EEC.
2
Compliance demonstrated using high-quality shielded interface cables shorter than or equal to 3 meters.
3
Compliance demonstrated with DC4100-HUB or LED4Cx series installed at the LED port.
4
Emissions, which exceed the levels required by these standards, may occur when this equipment is connected
to a test object.
5
Ext Trig port capped at IEC 61000-4-3 test.
6
Performance Criterion C was reached at voltage interruptions test level 0% for 250 / 300 cycles and is permit-
ted at this test level.
7
Replaces 73/23/EEC, amended by 93/68/EEC