Chapter 3: Setup & installation
Page 6
ITN000081-D03 Rev. N
3.6.2.
Driver Selection
Your camera requires a driver to be installed on your computer. After the
welcome screen, acceptance of the license agreement, and entering your user
information, you will be presented with a choice of drivers. Select the driver that
matches the interface on your camera; USB (2.0 or 3.0), Gigabit Ethernet, or
Camera Link. If you have more than one camera and with different interfaces,
select all that apply. If you’re unsure, select them all.
Select a driver for installation by clicking on the dropdown and selecting either of
the two choi
ces; “This feature will be installed on local hard drive,” or “This
feature, and all subfeatures, will be installed on local hard drive.” There are no
subfeatures, so both choices do the same thing.
If you do not wish to install the driver, select “This feature will not be available”
Once a driver is selected, the red X will be replaced with a hard drive icon as
shown in the USB selection below.
