HeartMate Universal Battery Charger IFU 5
2.0 Setting Up the Universal Battery Charger Before Use
Before using the HeartMate UBC (
Figure 1
) to charge HeartMate batteries, it
must be plugged in and turned on. In addition, you should select the
language/display panel setting best for your needs. These steps are described
below.
2.1 Plugging In and Turning On the Charger
Follow these steps for setting up the UBC:
1
If not already unpacked, carefully remove the UBC from its
product packaging. Place the charger on a flat, sturdy surface.
2
Inspect the charger for dents, chips, cracks, or other signs of
damage. Do NOT use a UBC that seems damaged. Contact your
VAD Coordinator or hospital contact person for a replacement, if
needed.
3
Examine the four battery charging pockets. Make sure the pockets
are clean and empty (no batteries), and free of dust or debris.
Note
:
Pay particular attention to the metal contacts inside the pockets.
Figure 1
HeartMate Universal Battery Charger (UBC) with empty charging pockets (front view)
