9
Release the cover plate by removing the cover screw
Loosen the cable clamp
Connect the mains supply cable to the terminal block on the hob using
the colour code
Secure the cable clamp
Check the cable terminals for tightness and ensure that the terminal
links are in place, then replace the cover plate and cover screw
Using Your Hob To
Before first use, clean the hob surface (see “Cleaning and Care”
section). Switch on one cooking zone at a time for 5 minutes at the
maximum setting to eliminate any smell. Place a saucepan half
filled with cold water on each zone as you burn it off.
To start cooking
1. Place pan on cooking zone that you wish to use
2. Select the control knob for the relevant zone and adjust to
the required power level
3. When you have finished cooking turn the cooking zone off
by turning the control to the “OFF” position.
WARNING! There is a risk of burns from residual heat
Warning!
Do not allow any object to drop on the hob. Never use a
hob which is cracked as water may leak through to the
electrics.
If the hob cracks switch off the appliance immediately as
there is a risk of electric shock
IMPORTANT:
The hob surface is tough; however it is not unbreakable and can
be damaged. Do not use the hob if the surface becomes broken or
cracked.
