H-DVB-S2X-MOD
Thor Fiber 2018 Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
parse and scramble the input program(s). (Figure-4)
Figure-4
Parameters
→
CID Settings:
RF CID
From the menu on up side of the webpage, click “CID Settings”, it displays the “RF CID” where the
distributor can check the location of device and contact information of the users, which is convenient for
distributors to maintain and manage the device. (Figure-5)
Figure-5
NIT CID
From the menu on up side of the webpage, click “CID Settings”, it displays the NIT table which is a very
important table for describing the network and TS. Set the parameters of the output NIT table and check
the NIT-CID information. It displays the interface as Figure-6.
Different parameters need to
be set with different BISS
modes:
Mode 0
: to NOT enable the
BISS scrambling function
Mode 1
: user needs to
configure ‘SW Date’ only.
Mode E
: user needs to
configure ‘Select ID’ and ‘ESW
Data’. ‘Input ID’ needs to set
when ‘Select ID’ is ‘Input’.
1 click ‘ParsePrg’ button to parse
the input program list
2 select the program(s) to be
scrambled by clicking the
corresponding check-box.
3 click ‘Set’ button to confirm
