THOR GH107-N, Техническое и сервисное руководство

Страница: 8 / 31

6. Check that the gas operating pressure.
NOTE: The operating pressure to be measured at the manifold test point and with 2 burners operating at the ‘High
Flame’ setting.
7.
Turn off the mains gas supply and bleed the gas out of the appliance gas lines.
8. Turn on the gas supply and the appliance.
9. Verify that the operating pressure remains correct.
Commissioning
1.
Before leaving the new installation;
a. Check the following functions in accordance with the operating instructions specified in the
‘Operation’ section of this manual.
• Light the Pilot Burner.
• Light the Main Burner.
• Turning 'Off' the Main Burner/Pilot.
b. Ensure that the operator has been instructed in the areas of correct lighting, operation, and shutdown
procedure for the appliance.
2.
This manual must be kept by the owner for future reference and a record of the Date of Purchase, Date of
Installation and the Serial Number of the Appliance must be recorded and kept with this manual. (These details
can be found on the Rating label, refer to the ‘Gas Connection’ section).
NOTE: If for some reason it is not possible to get the appliance to operate correctly, shut off the gas supply and
contact the supplier of this appliance.
Installation
6
Install the Regulator
Nameplate