H-4HD-EMS & EMH
Thor Fiber 2017 Tel: (800) 521-8467 Email:
www.thorbroadcast.com
Chapter 4 WEB NMS Operation
For setting configurations you can use the front panel; also you are able to control and set
the configurations on any computer by connecting the device to the web NMS Port. You
should ensure that the computer’s IP address is different from the Thor Encoders IP address;
otherwise, it would cause IP conflict.
4.1 login
The default IP of this device is 192.168.0.136. We can modify the IP through the front
panel. Connect the pc and the device with net cable, and use ping command to confirm
they are on the same network segment. E.G. the PC IP address is 192.168.99.252, we
then change the device IP to 192.168.99.xxx (xxx can be 0 to 255 except 252 to avoid
IP conflict). Use any web browser to connect the device with the PC by inputting the
Encoder & Modulator’s IP address in the browser’s address bar and press Enter. It will
display the Login interface as Figure-1. Input the Username and Password
(Both the
default Username and Password are “admin”.)
and then click “LOGIN”
Figure-1
