H-12HDMI/SDI - QAM/ATSC/DVB-T/ISDB-T
Tel: (800) 521-8467 Email:
https://thorbroadcast.com
Setting
Parameter
Connecting
Signal
cable
Connectin
g Grouding
Wire and
Power
Cord
Installing
Device
Device
Check
Running
Device
Chapter 2 Installation Guide
Please use caution when operating this device in order to abstain from any possible injuries during
installation. For this reason, please read all details listed below and make sure you use caution before
proceeding to operate and use this device.
General Precautions
Must be operated and maintained free of dust or debris.
The cover should be securely fastened, do not open the cover of the products when the power
is on.
After installation, securely stow away all loose cables, external antenna, and others.
Power precautions
When you connect the power source, make sure it is grounded correctly so it doesn’t cause an
overload.
Avoid operating on a wet floor in the open. Make sure the extension cable is in good
condition.
Make sure the power switch is off before you start to install the device.
Device’s Installation Flow Chart Illustrated as following