Instruction manual
Very important: Please read the whole of this manual before installing and using the washing
machine.
This manual is designed with the corresponding illustration accompanying the texts.
Identify which model your washing machine is
(
“a”, “b”
) by comparing the control panel with the
illustrations.
1.1
Unpacking the washing machine
(1.1.1,
1.1.2 and 1.1.3). Remove the transit brackers
and the fixing and blocking elements used in
transport.
1.2
Connection to the mains
(1.2.1, 1.2.2 and
1.2.3). If the washing machine has a hot water
intake, connect the red hose to the hot water
tap (1.2.4). Always use the new hose supplied
with the appliance. Remove any old previousy
used supply tubes.
1.3
Draining.
Install the elbow supplied, in
accordance with the measurements shown in
the diagram.
1.4
Lavelling.
Correctly level the washing
machine to prevent any noise or shifting. The
recommended order is as fallows:
1
. Position
the rear legs and fix them in place (1.4.1).
2
. Position the washing machine (1.4.2).
3
. Position the front legs and fix them in in
place (1.4.3).
1.5
Connection to the mains electric.
Refer to
the plate data (1.5).
1.6
Installation under a worktop.
If the wortkop
needs to be removed in order to recessmount
the washing machine, contact your distributor
or Technical Assistance Service.
For recess-mounting, the electrical plug must
be accessible after installation.
2.1 Opening the door.
0
Identification
1
Installation
2
Using the
washing
machine
2.2 Detergent and other products.
Load the
washing machine , after sorting the clothes
according to colour, fabric type and how dirty
they are.
The detergent compartment is divided as
follows divisions: wash , prewash and
fabric softener (2.2.).
All the washing machines are designed to use
detergent powder and liquid detergent.
Remember that you must not exceed the
MAX level marked on the fabric softener
compartment.
2.3 Switching on the washing machine.
2.4 Programme selection.
Select the programme
using the dial, after consulting the programme
chart.
2.5 Selecting the spin speed.
You can choose
or suppress a spin speed (2.5.1, 2.5.2,
2.5.3). If you select the Anti-crease option
(2.5.4) the washing process will stop before the
final spin and the clothes will be left in water.
You can desactivate the function, at any time it
will continue with the final spin.
2.6 Additional functions.
Intensive wash, easy
iron and extra rinse for heavily soiled items.
2.7 Start delay.
This option allows you to delay the
start of washing.
2.8 Starting up the washing machine.
2.9 Child proof lock.
Press Start/Pause and
hold it down for approximately 3 seconds
(2.9.1). This lock to prevents children from
using the washing machine. It is unlocked by
pressing the button again and holding it down
approximately 3 seconds (2.9.2).
2.10 Wash process.
You can check the programme
phase and the remaining programme time.
Recommendations for use:
As soon as the
washing machine is installed you can programme a
preliminary wash to check it is functioning correctly
(standar no load and at 60º). Use a protective net
bag for small items: handkerchiefs and underwear.
Observations:
1
. If you stop the washing machine
to add more items to the load, make sure the water
level is below the loading door.
2
. The additional
functions increase the washing time.
3
. When the
wash program, there is a 2 minute delay before you
can open the door.
e n g l i s h
7
