EN
21
To Delete Unwanted Still Images . . .
.... when unwanted still images are stored in the
MultiMediaCard or its memory is full, refer to
“Deleting Images” (
pg. 51) and delete unwanted
still images.
To Remove The Shutter Sound . . .
.... when you do not want to hear the shutter sound, set
BEEP/TALLY to “OFF” on the Menu Screen
(
pg. 30, 31). The sound is no longer heard from the
speaker.
NOTES:
●
Even if “DIS” is set to “ON” (
pg. 32), the Stabiliser
will be disabled.
●
If Snapshot recording is not possible, “PHOTO” blinks
when
SNAPSHOT
is pressed.
●
If Programme AE with special effects (
pg. 40) is
engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
●
If shooting is not performed for approx. 5 minutes when
the Power Switch is set to “
” or “
” and power is
supplied from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
close the LCD monitor and re-open it. When using the
viewfinder, push back it in and pull it out again.
●
The Motor Drive mode (
pg. 18) is disabled when the
Shooting Mode Dial is set to “VGA” or “XGA”.
●
To reduce the Red-Eye effect in the subject’s eyes when
the flash fires,
pg. 34.
●
When a headphone set is connected to the PHONE
connector, the shutter sound is not heard from the
speaker.
●
Still images taken are compliant to DCF (Design rules for
Camera File systems). They do not have any
compatibility with devices which are not compliant to
DCF.
●
In the XGA mode, images shot using a 800,000-pixel
Progressive Scan CCD (effective area: 720,000 pixels,
962 x 774 pixels) are converted and stored in the XGA
mode file size (1024 x 768 pixels).
Snapshot mode
with no frame
There is the sound of a shutter closing.