7
4 / PROGRAMMING YOUR MACHINE
•DETAILS OF THE VARIOUS DISPLAYS ON THE LCD SCREEN
(continued)
•
Programme Progress:
The 4 segments in the upper section appear in succession to show the phase the washing cycle is in:
— During the whole prewash,
— During the whole wash,
— During the whole rinse
— During the whole spin
•Tap Safety System:
A message is displayed when the water tap is closed or when there is no more water being supplied
to your washing machine. Please refer to section “INCIDENTS INDICATED, WHICH YOU CAN RECTIFY
YOURSELF”.
•Door Safety System:
A message is displayed when your washing machine’s lid is poorly closed. Please refer to section
“INCIDENTS INDICATED, WHICH YOU CAN RECTIFY YOURSELF”.
•Children’s Safety System:
You can protect your programming by locking it. Please refer to the section “CHILDREN’S SAFETY
SYSTEM”.
Display
•SETTING THE CURRENT TIME
•General:
Information:
Setting the current time is only compulsory when using the “Finishing Time” function: the
“Delayed Start” and “Remaining Time” functions do not require the clock to be set.
You can programme the current time at any time.
— When you switch on for the first time or if the power supply has been interrupted (a power failure or
the power cable has been unplugged, etc.) the “Finishing Time”
flashes when this function is selected
(for how to select this function, see the section “SETTING THE FUNCTIONS”).
•Programming the current time:
— Turn the selector
to any position other than “Off” to switch your washing machine on.
— Hold the button
down until the “Current Time” function flashes.
— Briefly press the button
, the hours flash without the minutes. Set the hour by pressing one of
the buttons
(this is set hour by hour over 24 hours).
— Briefly press the button
, the minutes flash. Set the minutes using the buttons
(these are
set minute by minute over one hour).
— Press the button
briefly to record your setting.
When the clock setting is confirmed, the current time stays fixed for a very short period
and then
the “Finishing Time” function
is displayed
. Your machine is now ready to use this function.
•Changing “Summer Time / Winter Time”:
— Proceed in the same way as above.
•Power failure during a cycle:
— When the power is restored, the program continues its normal course.
If you had programmed a “Finishing Time”
, this flashes.
Important:
If there is a power failure during a cycle, the “Current Time” is cut off throughout the interruption.
If you want to use the “Finishing Time” function again, you must reprogramme the current time.
5
6
5
6
5
A
5
1
A
Information:
All the displays shown in these instructions are provided only as examples. The actual displays can vary depending on the model, the
selected programme and the programming time.
Important:
Before switching on your machine, check that the power cable is plugged in and that the water tap is open. Also ensure that the drum
doors and the machine’s lid are shut correctly.
