YourrECEIvEr
P5
English
6.
baCK
Switches between the two last watched channels
7.
Info
Shows the actual channel information
8.
pq
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
9.
tu
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
10.
oK
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
11.
mEnu
Opens the main menu/ in menu you will get one step back
12.
EXIT
Exits from the menu or sub-menu
13.
guIDE
Shows the EPG (Electronic Program Guide) in TV mode
14.
v+/v-
Volume up/down
15.
Mutes audio output of the receiver
16.
P+/P-
P/- (up/down in lists)
17.
sub
Shows the list of subtitle languages
18.
TXT
Shows teletext on OSD (On Screen Display)
19.
auDIo
Shows the list of audio settings
20.
lIsT
Opens the recordings list in viewing mode
21.
oPT
No function
22.
v.fsign
Switches between TV and VCR mode
23.
:
No function
24.
5
,
6
Fast rewind / Fast forward
25.
"
Performs slow motion in mpg and recording playback
26.
4
Starts recording of the current broadcast
27.
1
Starts playback of the selected file in Media Player
28.
2
To start Timeshift in viewing mode, in Multimedia for Pause
29.
3
Stops playback of the selected file in Media Player
30.
rED
For Teletext functions. Different functions in the specific menus.
31.
grEEn
For Teletext functions. Different functions in the specific menus.
32.
YElloW
For Teletext functions. In viewing mode freeze picture. Different functions
in the specific menus.
33.
bluE
For Teletext functions. Different functions in the specific menus.
2.5Installingthebatteries
Fig. 4
Remove the battery cover from the remote control and put 2XAAA size batteries inside
the compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
1. Open the cover 2. Install batteries 3. Close the cover
noTE:
The batteries should not be recharged, disassembled, electrically short-circuited, be mixed
or used with other types of batteries.
2.6usingtheremoteControl
Fig. 5
To use the remote control, point it towards the front of the digital receiver. The remote control
has a range of up to 7 metres from the receiver at an angle of up to 60 degrees.
noTE:
The remote control will not operate if its path is blocked.
