maInmEnu
P13
English
record
There are 3 different ways to record programmes:
Instant recording, recording from EPG and
recording via timer
y
y
Instant recording
In viewing mode press
4
to instantly start a record on the current channel.
Press
rED
(
3
) to stop recording. If you press
4
again, you can adjust the duration for this
record. Insert the time with the numeric buttons and press
oK
to confirm, then press
EXIT
to
remove the message.
y
y
From EPG
Press the
EPg
button to enter the programme guide, than select an event and channel with the
buttons described on screen. Press
4
at the desired event to program a timer for it. An icon will
be displayed beside the planned event. If you don’t want to record this event you just need to
press
4
again.
y
y
Manual scheduling
You can set a record manually via the Timer menu. For details refer to
chapter 5.3.4
Timer Setting.
noTE:
In case the available free space on the USB device is not enough, recording operation of
broadcast will stop. Maximum available Timeshift setting is 1h. Available record types: TS: Transport stream
including teletext, subtitles etc. PS: Program stream for playback by PC or another device.
With
TTr100
you can record one channel while watching another within the same frequency.
With
TTr110
you can record 2 channels from different frequencies to USB device and you can watch
another programme within the same frequency of the last recording.
WarnIng:
Please consider that Timeshift needs min. 0,58 GB free space on the USB device and an
accurate Timeshift function is depending on the speed of the used USB device.
5.5.5safelyremovestorageDevice
In
“Media+”
menu, select
“Safely Remove Storage Device”
and press
oK
to safely remove the
USB device. Then a message is displayed.
5.5.6Diskformat
1. In “Media+” menu, select
Disk Format
and press
oK
to enter this menu.
You will see actual used Device and Partition displayed, furthermore the available Capability
in GB is shown.
2. Press
pq
to select File System and use
tu
to change between different settings.
