Note: The LED display shows the ambient temperature (room temperature) near the heater, to achieve
optimal indoor temperature, it is advisable to increase the target temperature during the first hour of use
of the device, then you can adjust the temperature.
▪
Auto mode
, the heater works at different power according to the room temperature:
When the ambient temperature is lower than 17
℃
,
the heater automatically default to work at high power:
When the ambient temperature is below 21
℃
,
the heater automatically default to work at low power:
When the ambient temperature is above 21
℃
, the heater automatically stop working. (just blow the
cold air)
▪
Frost protection mode
the working temperature is 7
℃
.
▪
The timer power on and power off
can be set at any mode.
After the mode has been selected, press the button
“+”
to select the timer power on
or on
“
-
”
to select
timer power off. Icon
continue to flash, press
to set the time needed, when the icon
stops flashing means the timer start
action.
Note:
The timer is set in the same way for the control panel of heater and remote control.
7. Press
on the control panel of heater or
on the remote control to select
oscillation on/ off.
Note
: Oscillator will be back to home position automatically after turn off Oscillator function or turn
off the product.
Note: When not in use, please switch off and disconnect from mains wall socket
REMOTE CONTROL
1. Use only 1 CR2025 button battery, 3 volts. Used batteries must be disposed safely.
Dispose them in collection bins provided (check with your dealer) to protect the environment.
2. Respect the polarities (+) and (-) when inserting them.
3. Your remote control includes the functions as those shown on the control panel of the heater.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. Recycle of dispose of used batteries according to local regulation.
PRECAUTIONS FOR USE AND MAINTENANCE:
1. Always unplug the appliance and keep it away from any socket before cleaning.
To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it thoroughly with a soft,
dry cloth before using again.
Do not use any cleaning or chemical products of any kind. Do not let water enter the openings on the
heater.
2.
When the appliance is not being used for prolonged periods, ensure that it is fully unplugged from the
socket and store in its packaging for simple storage and later use.
GB-7
