LNB 22K
This setting is available if the selected converter type is other than
Universal
.
Select the desired value using thekeys
◄ ►
. Set to
On
to have the terminal automatically select the band when sending the
22 kHz control signal, or to
Off
to disable the control signal.
P7
MAIN MENU
Switch type
To select the type of switch present on your wired network. Select
None
, if
there is no switch on your network.
Switch input
Indicate the number of the input to which the converter is connected.
Once you have made your settings, press the RED button to save.
5.1.2 Edit Satellites
This menu allows you to modify the list of satellites. Using thekeys
▲ ▼
select a
satellite.
Edit satellite
(RED) Allows you to edit the name and orbital position of the
selected satellite.
Add satellite
(GREEN) Add a new satellite to the list.
Delete
satellite (YELLOW) Allows you to delete the selected satellite.
To edit the list of transponders for the selected satellite, press thekey
►
to move the focus to
the list of transponders.
In the list of transponders:
Edit Tp
(RED) Used to edit the parameters of the selected transponder.
Add
Tp
(GREEN) Used to add a new transponder.
Delete Tp
(YELLOW) To delete the selected transponder.
Save
(BLUE) To save the changes
5.1.3 Manual installation
This menu allows you to install channels from a satellite in several modes.
Satellite
Indicates the name of the satellite.
Antenna No
Indicates the number of the dish used. You can change the LNB Settings. The
detailed description of the LNB settings. The detailed description of the
LNB settings is described in 5.1.1.
Transponder
Move the focus to this menu and press OK, the list of transponders will be
displayed on the right of the screen. You can select a transponder to
check the strength and quality of the received signal.
The transponder list contains predefined transponders.
Scan Mode
Select
All Channels
to allow the terminal to scan and save all “scrambled”
channels to install onlychannels
scrambledand “FTA” to install only free-to-air channels.
Service type
Select
All
or
Radio
only or
TV
only
Once the settings have been made you can start the channel search. Press RED button to
install channels from all satellite transponders. If the transponder you want to scan is not on
the list, press the YELLOW key to install the transponder settings and press the GREEN key
to scan the added transponder.
5.1.4 Quick installation
Choose this menu and press OK to automatically update the list of channels of the TNTSAT
service offer.
5.2 Systems Configuration
This menu is used to configure theparameters
Outputs
,
Languages
,
Parental control
,
Time
settings
and
System information
5.2.1 Output settings
In this menu you can set the HD output resolution, the SCART standard, the Aspect ratio, the
SPDIF standard, the HDMI standard. Please consult the manuals of the other equipment
