14
will be asked to confirm. Selection above 576i is only applicable on HDMI
output.
Aspect Mode
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are:
Auto
(automatic detection of aspect
ratio),
4:3PS
(Panscan) (Displays 16:9 widescreen broadcasts full screen on
your 4:3 TV),
4:3LB
(letterbox) (black bars on top and under the picture on a
4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Digital Audio Output
: Toggles between
PCM
and
Bitstream
output. When
PCM
is selected, all
digital audio will be converted to stereo audio.
Bitstream
enables you to
listen or transfer Dolby® Digital/Dolby® Digital Plus* audio to the TV via
HDMI or to a Home entertainment system (for example) through coaxial S/
PDIF.
NOTE:
Dolby® Digital Plus* is only available on the HDMI output.
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region
:
Use
tu
to select the region you live in.
GMT Usage
:
Set to
By Region
for broadcaster defined time,
User Define
to select manual
a GMT zone or to
Off
to input time and date manually.
GMT Offset
:
Allows you to adjust your time zone. This option is only available when
GMT
Usage
is set to
User Define
.The
GMT Offset
range is "-11:30 ~ +12:00",
increasing by half hours progressively. The cities matching the set
GMT
Offset
are displayed at the bottom of the screen.
Summer time
: Select
On
to add one hour for summer time.
Date
:
Date
and
Time
settings are available only when
GMT Usage
is set to
Off
.
Use the
0~9
buttons to enter the date. Press
to proceed.
Time
:
Date
and
Time
settings are available only when
GMT Usage
is set to
Off
.
Use the
0~9
buttons to enter the time. Press
to proceed.
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use
p
/
q
to select
Timer Setting
from the
System Setup
menu and press
OK
to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with
p
/
q
and press
OK
to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode
:
Choose between
Off
the timer is inactive,
Once
,
Daily
(the timer will be
executed every day, same time) or
Weekly
(the timer will be executed every
week, same day, same time) and
Monthly
(the timer will be executed every
month, same day, same time).
Timer Service
:
Choose between
Channel
(the timer will wake up the receiver) or
Record
(Timer will start recording the scheduled event).
Wakeup Channel
: Use
tu
to select the channel the timer will wake up with.
Wakeup Date
:
Use the
0~9
buttons to enter the date for the timed event.
On time
:
Use the
0~9
buttons to enter the starting time.
Duration
:
Use the
0~9
buttons to enter the duration of the timer.
When all settings have been made, use
p
/
q
to move the highlight to
Save
and press
OK
to confirm.
To quit the timer without saving your settings, move the highlight to
Cancel
.
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also
enter a new PIN code in the
Parental Lock
menu.
