19
SSID:
The SSID differentiates one Wireless LAN group name from another; so
all access points and all devices attempting to connect to a specific Wireless LAN
group name must use the same SSID. A device will not be permitted to join the
BSS unless it can provide the unique SSID.
Wireless Mode:
If you want to connect with an Access Point/WLAN Router,
please set to “Infrastructure” mode. If you have more stations and just want to set
them as local network, please set the mode to “Ad-hoc” mode.
Channel:
It shows
auto
that used for Infrastructure Wireless LAN network. The
channel number can be set only under the Ad-Hoc operation mode. In Ad-Hoc
mode stations, each station must have the same channel number and SSID.
Note: For FCC Domain device, you can only select Channel 1 ~ 11 in Ad-Hoc mode.
In Infrastructure mode, the Wireless USB Adapter will automatically detect the
channel number of the Access Point.
Power Mode:
There are 3 modes to choose:
Continuous Access Mode (default)
: The USB Dongle is constantly operating
with full power and it consumes the most power.
Maximum Power Save
: The USB Dongle consumes the least power and only
operates when there is wireless network activity.
Power Save
: The USB Dongle consumes the moderate level of power.
Preamble:
Select Long or Short/Long (auto) Preamble type. Preamble is a
sequence of bits transmitted at 1Mbps that allows the PHY circuitry to reach
steady-state demodulation and synchronization of bit clock and frame start. Two
different preambles and headers are defined: the mandatory supported Long
