THOMSON ROC 40, Руководство пользователя

Страница: 8 / 69

EN
4
When you have retrieved the code of your set, jot it down so that you can use it whenever
needed.
After battery replacement, you’ll have to programme the remote control again.
- For a TV set or satellite receiver: press for instance number key 2 to switch over to another channel or to switch
the set on, in case it is off.
- Video recorder: load a tape and then press PLAY.
- DVD player: load a DVD and then press PLAY.
Try other remote control keys to find out the range of functions you can control. If you think that not all of the keys
are active, try the programming Method B or C.
4 – How to retrieve a programmed code
5 – Check of the programming
6 – The NAVI LIGHT system
It may be useful to retrieve the code programmed in the remote control.
1. Hold down the key SETUP/SHIFT (20) until the red indicator lamp (12) remains lit.
2. Select the set to be controlled.
TV
(4): television set, VCR (3): video recorder, SAT (5): satellite receiver
3. Press SETUP/SHIFT (20) again briefly. The red indicator lamp flashes once.
4. Press the number keys (0 to 9) in ascending order until the red indicator lamp
(12) flashes once.
5. The digit which made the red indicator lamp (12) flash, is the first number of the
3-digit code. Please note it down below.
6. Repeat step 4 to find out the two other numbers of the code.
7. When the third number is found, the red indicator lamp (12) goes off.
The THOMSON NAVILIGHT system allows you easy access to the settings of your
television (TV) or video recorder (VCR) including this feature.
1. Switch on the set you want to control.
2. Select the type of set concerned. In the VCR position, make sure that the AV mode
is activated for the TV set (the SCART socket must be selected).
3. Press key MENU (9) once.
4. To travel through the setting menus, press the SETUP/SHIFT (20) key once and
then use the keys up, down, left and right (18 and 19).
5. Validate with SETUP/SHIFT (20)
+
MUTE/OK
(10).
6. To leave the menus, press key EXIT (17) once.
TV CODE VCR CODE SAT CODE
+
+
You can contact THOMSON by dialing: 0845 601 3093 ,
from 27 November 2000.
(For Great-Britain, all calls will be charged at local rate)
www.thomson-europe.com
ROC 40-16L 25/02/02 15:16 Page 4