- EN 7 -
5.
“Alarm 1 (or 2) Wizard On Time” is displayed and the hour digits for the alarm will flash.
6. Press
/
repeatedly to set the hour. Press
ENTER
to confirm.
7. Press
/
to set the minutes, and press
ENTER
to confirm.
8. Press
/
to select the Alarm volume from 0 to 30, and press
ENTER
to confirm.
9. Press
/
to scroll to the OFF/CD/DAB/FM/BUZZER status. Press
ENTER
to confirm.
10.
Press the
/
button to scroll to the duration for the alarm. You can choose from 15, 30, 45 or
60 minutes. Press the
ENTER
button to select. Press
/
to select YES and press ENTER to
save the alarm,
11.
The display will show the current time and the alarm time.
Snooze
1.
Whenever the alarm comes on, it can be temporarily suspended for a short period of approximately
9 minutes, by pressing the “
SNOOZE
” key once.
2.
The alarm will then automatically come on again after the approximately 9-minute long “ ” period
has ended.
3.
The “ ” symbol will appear on the display to remind you that the snooze function is active.
4.
To deactivate the snooze function, press and release the “POWER” key once.
DAB Radio Mode
Carefully extend the telescopic aerial.
Press the
POWER
button to turn on the unit, which will automatically be in DAB mode.
Auto Scan
1.
Press the
FUNCTION
button to select “DAB Mode” (if the unit is not in DAB mode)
If this is the first time the unit has entered DAB Mode, it will automatically start an ‘Auto Scan’
to search for available stations. (Once DAB Mode has been used at least once, the unit will
automatically first select the last previously played station)
2.
Press [ENTER] button to automatically start auto scan to search for available stations.
During the scanning process, the lower line of the display shows a bar graph indicating the
progress of the scan.
3. Rotate
RADIO TUNING
to listen to the available stations
Manual Scan
1.
Press the
FUNCTION
key on the main unit to select “DAB MODE”.
2.
Press the [
] or [
] button to select “Manual Tune”, then press the [ENTER] button to
enter the service menu.
3. Press [
] or [
] to tune in the desired channel. The graph will indicate the signal
strength.
4. Press [MENU] or [
] to exit scan.
5.
If no stations are found, please ensure that the aerial is extended and test the reception by
doing another auto scan in a different location.
6.
Rotate the
RADIO TUNING
to listen to the available stations.
