THOMSON Multy TH-500DBE, Руководство пользователя

Страница: 18 / 22

17
Caller ID
– type I & II

TYPE I
After you have applied the caller ID service, you can see the caller phone number during an incoming
ring.

TYPE II
During the conversation, the phone number of the incoming call of the second caller can be seen in the
unit.
This function can be worked when the user applied the Telecom service.
Auto timer
The timer will start automatically after 6s of the telephone line is engaged.
Flash
When dial a number and the line is busy, press
R/×
and
BIS
key to dial it out again.
Pause
Press
BIS
key will insert a time delay of 3.6 seconds in a dialing sequence.
Pre-dialing
The unit has pre-dialing function, when you may enter and edit the number before dial it out.
The following procedure describes how to use this function
:
1. In idle mode, enter the number you want to dial. During entering, you can press
R/×
key to correct
the number.
2. Press
key, the unit will dial out the number show on the LCD.
Redial function
1. Press key,
2. Press
BIS
key, the last dialed number will be dialed again
NOTE:
the maximum length of name & number are 12 characters & 20 digits respectively.
Name matching
If you have edited the incoming message with different name, next time with the same incoming
number will display the modify name.
Review /delete /call back incoming numbers

Review
In standby mode, press
∧
key once and then use
∧
or
∨
key to scroll and review the incoming
numbers.