Selecting Tape Player
Press
SOURCE
on the main unit or
TAPE
on the
remote control to select tape mode.
Playing a Tape
1. In tape mode, press on the cassette door to
open it.
2. Insert a tape into the door and push the door
closed.
3. Press
SKIP BACKWARD
/
SKIP
FORWARD
to position the tape to the
desired starting position.
4. Press
PLAY
to begin playback.
5. Press
PAUSE
to pause playback.
Tape Counter
You can keep track of tape position with the tape
counter. Press
PROG/SET
to reset.
Recording
From Tuner
1. Insert a tape into deck.
2. Press
SOURCE
repeatedly on the main unit or
TUNER
on the remote control to select Tuner .
3. Press
BAND
to access the desired radio band.
4. Press
SKIP BACKWARD
or
SKIP
FORWARD
to tune to the station to be
recorded.
5. Press
RECORD
to begin recording.
6. press
STOP
to end recording.
From CD
1. Insert a tape into deck .
2. Press
SOURCE
repeatedly on the main unit to
select CD then press
DISC SKIP
on the remote
control or
DISC1 / DISC2 / DISC 3 / DISC 4
/ DISC 5
on the main unit to select the disc to
be recorded.
3. Press
SKIP BACKWARD
or
SKIP
FORWARD
to select the track to be
recorded.
or
Press
PROG/SET
to enter program mode.
4. Press
RECORD
to begin recording.
5. press
STOP
to end recording.
From AUX
1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on
the back of the system.
3. Start playback on the auxiliary device.
4. Press
RECORD
to begin recording.
5. Press
STOP
to end recording.
15
EN
Tape Player
MS4200 EN 2/3/04 9:54 AM Page 20
