Setting Up a CD Program
1. While the CD player is stopped, press
PROG/SET
to enter program mode. The
system displays the next available program
number (-- -- P:01).
2. Press the corresponding disc number on the
main unit or
DISC SKIP
on the remote control
to select disc. Refer to the Disc Number display
to see the disc that is selected.
3. Press
SKIP BACKWARD
/
SKIP
FORWARD
on the main unit or or
on the remote control to select track to enter
into memory.
4. Press
PROG/SET
to save your settings.
5. Repeat steps 2 to 4 to store more tracks into
program memory.
Playing a Program List
While in PROGRAM mode , press
PLAY/PAUSE
.
If you are not currently in program mode, press
PROG/SET
to enter program mode before
pressing
PLAY/PAUSE
.
Display Program List
1. While the CD player is stopped, press
PROG/SET
to enter PROGRAM mode.
2. Press
PROG/SET
repeatedly to view each track
assignment in the program list.
Edit Program List
1. Follow “Display Program List” steps until the
location to be edited is displayed.
2. Repeat steps 2 to 4 under “Setting Up a CD
Program “ to edit the track to store into
memory.
Clear Program Location
Press
PROG/SET
repeatedly until the program
location to be cleared is displayed. Press and hold
STOP
to clear.
12
EN
CD Player
Tips:
You can create a program of up to 32 tracks.
Note:
Only the first 99 tracks from each disc can
be programmed.
MS4200 EN 2/3/04 9:54 AM Page 17