Display
Showing Demonstration
Not operational in CD mode. Press
DIMMER•DEMO / CD INFO
to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.
Setting the Clock
1. Press and hold
CLOCK/RDS
until the hour
flashes on the display.
2. Press
DIGITAL TUNING
or to set
the hour and then press
CLOCK/RDS
to shift to
minute digits.
3. Press
DIGITAL TUNING
or to set
the minute.
4. Press
PROG•SET
to save settings and
STOP
to quit setting.
Setting the Timer
1. Press and hold
TIMER
until the ON appear
with the hour flashing ( ON - timer on time )
2. For setting time, press
DIGITAL TUNING
or to set the hour and then press
TIMER
to shift to minute digits.
3. Press
DIGITAL TUNING
or to set
the minute.
4. Press
TIMER
to change to OF (timer off time)
with hour flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press
TIMER
to select source. Press
DIGITAL
TUNING
or to select TUNER, TAPE or
CD.
6. Press
TIMER
to set volume. Press
VOLUME
CONTROL
up or down to set desired volume
level.
7. Press
PROG•SET
to save settings or
STOP
to
quit setting.
Activating the Timer
Press and release
TIMER
to turn on/off the timer.
The timer is active when the clock icon is
lit.
Adjusting the Display Brightness
1. Press and hold
DIMMER•DEMO / CD INFO
for more than 2 seconds.
2. While the dimmer level is displayed, press and
release
DIMMER•DEMO / CD INFO
repeatedly to select the desired level
(DIMM 1 - 3).
5
EN
Settings
BASS
SURROUND
Note:
• When system is ON, you can press
CLOCK/RDS
to display the current time
for about 2 seconds.
• Clock can not be set in FM mode.
DIMM 2
Note:
• The dimmer level can only be adjust for
when the unit is in ON mode.
• In standby mode, the dimmer level
remains at DIMM 3 and in magic demo
mode, the dimmer level is at DIMM 1.
MS2200 EN 11/17/03 1:59 PM Page 10