- EN 9 -
MP3 DISC SECTION
1.
Press the
POWER
button to turn on the unit.
2.
Press the
SOURCE
button repeatedly to select CD Mode.
3.
Close the CD Door and the disc will rotate for a few seconds and then play the 1st track automatically.
4.
Press the
and
buttons to choose a track .
5.
To temporarily stop playback, press the button; to resume, press the button again.
6.
Press the
button to stop play.
Note: Because MP3 discs have a large capacity, disc access times are a little longer.
Repeat Playing Function
Single Track Repeat
Press the REPEAT button once to repeat a single track. The display appears as “Repeat one”.
Whole Disc Repeat
In Play mode, press the
REPEAT
button 2 times to repeatedly play all tracks on the disc. The display
will show “Repeat All”.
To cancel repeat play, press the
REPEAT
button repeatedly until the “Repeat off” sign appears.
PROGRAM PLAY
The tracks on the disc can be programmed to play in any order (up to 20 tracks can be programmed).
Note: this can only be done while in Stop mode
1.
Press the
PROG
button while in Stop mode. “P01” “F01” will appear on the display and “T001”
will flash.
2.
Press the
or
button to select the desired tracks in the album, then press the
PROG
button
to store in the memory.
3.
The first track number is now stored in the memory, and the program number changes to “P02”,
waiting for your next selection.
4. Repeat Steps 1 – 3 to program additional tracks.
After programming is finished, press the
button, and programmed play begins from the first
programmed track. The player stops automatically after all programmed tracks have been played.
(Press the button twice to cancel the programmed tracks memory).
Playing Music via USB
This device has been developed using the latest technical advances in the USB field. However, given
the wide range of USB storage device types that are currently on the market, we unfortunately cannot
guarantee full compatibility with all USB storage devices. For this reason, in rare cases, there may be
problems in playing back files from USB storage devices. This is not due to device malfunction.
1.
Press the
POWER
button to turn on the unit.
2.
Press the
SOURCE
button repeatedly until ‘USB’ appears on the display.
3.
Connect a USB storage device directly to the USB port. The display briefly shows the number of
folders and then the total number of tracks. Playback will automatically start after a few seconds.
4.
Operation of the control buttons is the same as for MP3 playback. Please refer to MP3 DISC
SECTION operations as described previously.
NOTES:
•
Always directly connect a USB storage medium to the USB port to prevent any malfunctions.
•
The USB port is not designed for charging external devices.
•
Important: Switch the device to a different operating mode before you remove the USB storage
device.
SOUND setting
With your unit switched on (not in Standby mode):
1.
Press the
SOUND
button to enter the menu options.
2.
Use the
/
button to set the EQ function (e.g. Normal, Classic, Jazz, Pop, Rock ) according
to your individual preferences.
3.
Press the
SOUND
button twice and use the
/
button to scroll the Bass setting.
4.
Press the
SOUND
button three times and use the
/
button to scroll the Treble setting.
