THOMSON MIC192U, Руководство пользователя, Страница: 18 / 68

BLUETOOTH
®
MICRO SYSTEM
MIC192U
INSTALLATION USE
SETTING THE CLOCK
In stand-by mode:
• Press CLOCK SET .
• Press
7
or
8
to 12 or 24 hours mode.
• Press SELECT to confirm : the hour display flashes.
• Adjust the hour using the
7
or
8
keys.
Press SELECT to confirm: the minutes display flashes.
• Adjust the minutes using the
7
or
8
keys.
Press SELECT to confirm.
SET THE ALARM
• Press and hold during 2 seconds ALARM1 / ALARM2 :
symbols / and the hour display flashes on the
screen.
• Adjust the hour using the
7
or
8
keys, then press
SELECT to confirm: the minutes display flashes.
• Adjust the minutes using the
7
or
8
keys, then press
SELECT to confirm.
• Press
7
or
8
to select BUZZER / RADIO / CD /
USB as a source of alarm, then press SELECT to
confirm. Note : If the USB source is selected, but no
USB device is connected, the unit will switch BUZZER
automatically.
• Press
7
or
8
to adjust the volume.
(The default alarm volume is 15).
ACTIVATE / DEACTIVATE AND STOP THE ALARM.
To enable:
• Press ALARM1 / ALARM2 : symbols / appear on
the screen.
To disable:
• Press ALARM1 / ALARM2 to disable: until the symbols
/ disappear.
To stop:
• When the alarm sounds, press
q
to stop it.
To repeat:
• Press SNOOZE on the remote control or any key on
the device to temporarily stop the alarm, that alarm
will sound again after 9 minutes for 60 minutes. The
symbols / flashes and the SNOOZE symbol
appears on the screen.
INSTALLATION (See pictures below)
The device can be installed:
On a stand ( 6 ):
• Put the hooks from the base in the central cavity at the
back of the device. Check that the base does not come
off. To remove the base, pull it downwards.
On the wall:
• Use a spirit level to mark the holes to be drilled.
• Drill holes at the marked points then insert the wall
plugs.
• Attach the 2 fixing wedges to the wall using the 2
screws ( included ).
• Screw in the 2 screws (included) to the wall.
Then attach the sound bar and make sure it is stable.
MAINS POWER SUPPLY
Caution:
• Risk of damaging the product! Make sure that the input
voltage corresponds to the voltage indicated on the
device.
• Connect the mains adapter plug to the socket ( 5 ).
• Connect the adapter to a plug socket.
• Only use the adapter provided. To use another adapter,
check that it has identical characteristics and is
compliant with current standards.
TURN ON / STANDBY
Press
q
to switch on the device or put it in standby mode.
Note:
• When the device is turned on, if it is not used for 20
minutes, it automatically switches onto standby mode.
6
142 mm
4
Screw
Fixing wedges
Wall plugs
plastic
16 EN