background image

1-4

Operator's Manual LDK 20(S) - Studio Camera

Introduction

Important Precautions

To ensure continual high performance from the
LDK  20(S) camera take the following precautions into
consideration:

Avoid very damp places. If the
environment is wet or damp a
raincover must be used to protect it.

Do not subject the unit to severe
shocks or vibration.

Do not expose the camera to
extremes of temperature.

Do not leave the unit in direct sunlight
or close to heating appliances for
extended periods.

Do not allow sunlight to shine into the
viewfinder.

Avoid extreme highlights as these
can cause various kinds of optical
reflections.

Warnings

If the LDK 20(S) is in a wet or damp environment, a
raincover must be used to protect it for personal
safety reasons (EN60065). The raincover LDK6988/
00 protects the camera according to safety specifica-
tion EN60529 up to level IPX2 (spraying water).

FCC Class A Statement

This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used
in accordance with the instructions, may cause
interference to radio communications.
It has been tested and found to comply with the limits
for a class A computing device pursuant to Subpart J
of part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when
operated in a commercial environment.
Operation of this equipment in a residential area is
likely to cause interference in which case the user at
his own expense will be required to take whatever
measures may be required to correct the interference.

Содержание LDK 20 S





























































Отзывы: