background image

Before getting started

23 February 2004

PVS3000 & PVS 3500 Installation Guide

5

Checking standard accessories

Your Profile XP Media Platform is shipped with several standard accessories as 
shown in the table. Locate the accessories you need for your installation and proceed. 

About PVS3000 and PVS3500

The PVS3000 Series introduces the ability to use standard and high definition 
hardware in the same Media Platform. Various models provide different capabilities, 
depending on the hardware and software licenses that you purchase.

PVS3000

The PVS3000 provides separate SD and HD hardware in a single Media Platform. 
You can define SD and HD channels that can run concurrently in your system. 

SD channels allow you to record SD clips in MPEG (I-frame, Long GoP, or D-10), 
DVCPRO 25, and DVCPRO 50 formats using your standard definition SDI inputs. 
You can play clips in any combination of these formats on any SD channel using an 
SDI output.

HD channels let you record and play high definition clips with your HD-SDI inputs 
and outputs. 

PVS3500

The PVS3500 includes an Agile Output software license that enables you to play SD 
and HD clips through an HD decoder. 

If your Definition Independent HD/SD Player channel includes a standard definition 
SDI output, SD clips play out normally, and all HD clips are down-converted to SD 
format with the aspect ratio conversion that you set with Configuration Manager. 

If your HD/SD Player channel includes an HD-SDI output, HD clips play out 
normally, and all SD clips are up-converted to HD format with the aspect ratio 
conversion that you set with Configuration Manager.

NOTE: SD clips must be in MPEG 4:2:0 format to play out on a Definition 
Independent channel.

Standard PVS3000 Accessories

Keyboard and Mouse

Ethernet Cable

I/O Panel and interface cable

Windows NT Software Disk and Documentation

Rack-mount slides

Profile XP Software CD-ROM and Release Notes

Содержание GRASS VALLEY Profile XP PVS3000

















































Отзывы: