manualshive.com logo in svg

THOMSON GRASS VALLEY KayakDD-1, Руководство пользователя, Страница: 80 / 448

Поделиться
Скачать
THOMSON GRASS VALLEY KayakDD-1 Скачать руководство пользователя страница 80

KayakDD - Digital Production Switcher

 

3.5.2 Transition 

Types 

 

The

 DPM, Add, Mix, Wipe

, and 

User Tran 

transition type buttons select what type of 

transition will be used on the elements selected above for the next transition. Pressing 
these buttons does not change the appearance of the current output of the switcher. 
Only one transition type can be selected at a time. 
 

• 

The 

DPM

 button is only available for Key Transitions. If the Background is 

selected for next transition in combination with keyers, the background will 
perform an add/mix/wipe transition, depending on the last transition type 
selected prior to the 

DPM

 selection. This type will be indicated in the display 

above the BGD button.  
The behavior of a 

DPM Key Transition

 is as follows:  

In a mix/wipe transition the 

Lever Arm

 or the 

Auto Trans

 control the video 

amount of the keyer. In a DPM transition the 

Lever Arm

 or the 

Auto Trans 

control the timeline of the DPM effect selected for this keyer.  
When the key was off at transition start, the video amount of the keyer is fully 
switched on at transition start, allowing to fly the key in.  
When the key was on at transition start, the video amount of the keyer is fully 
switched off at the end of the transition, allowing to fly the key out.  
 

NOTE! The DPM  effects used for transitions should be build in a way that the 
last keyframe is out of screen or size zero. 

 

• 

The 

Add 

button selects a Full Additive Mix as the next transition. 

 

• 

The 

Mix 

button selects a mix as the next transition. 

 

• 

The 

Wipe 

button selects a wipe as the next transition. Each wipe is predefined 

using either the complex wipe generators or the Utility buses as the wipe 
shape. Wipe pattern selections are made in the Wipe menu. 

 

• 

The 

User Tran 

button selects customized user defined transition settings. 

Specialized enhancements and combinations of transition effects, including 
Mix through Video, FAM (Full Additive Mix) or DPM (Transform Engine) 
transitions, can be programmed into a user transition.  
 

NOTE! 
User Tran is not supported in the software release version 1.0. Since the 
number of buttons for transition types is limited, User Trans would only be 
accessible via menu or after having reprogrammed buttons in the Main 
Transition Subpanel (later software). 

 

80 

User Manual 

 

Содержание GRASS VALLEY KayakDD-1

































































































































































































































































































































































































































































Отзывы:

Нет отзывов