THOMSON GRASS VALLEY KayakDD-1, Руководство пользователя

Страница: 141 / 448

KayakDD - Digital Production Switcher
When adjusting the genlock phase, all sources have to be successively checked for
up on the bus Aux1 . Select the inputs with the GL Dig Inp
rc button.
ith
e
mixe
inpu
it
left
timin
their timing by switching
S
W
Phase , the phase relation of the mixer can be s15/–15 lines in comparison
with the genlock reference signal. The display (left of the button) serves for checking
th timing of the sources. The bar diagram displays the timing of the source to the
r that is current selected on bus Aux1 . The bar diagram shows the timing of the
t source relatively to the autophasing range. All sources should be timed between
the two marker lines in the middle area of the bar. The right line (with the respective
sw cher type name) marks the earliest mixer input (latest timing of the sources). The
line marks the earliest timing of the sources. The bar is displayed black, if the
g is in the phasing range or yellow, if the timing is outside the phasing range.
Figure 67 Install - Genlock Menu with asynchronous buses
The menu shows the following information:
Aux1: Shows the selected source on the Aux1 Bus witch is used
for timing measurement.
Vert: Shows how many lines the source is off in comparison to the
switcher timing.
Hor: Shows how many us the source is off in comparison to the
switcher timing (only if Vert = 0).
Ext. Ref.: Shows the standard of the Black or Blackburst signal at the
genlock input.
Current Std.: Shows the standard of the Black or Blackburst signal at the
genlock input.
User Manual 141