THOMSON Grass Valley KAM-HD-MULTI, Инструкция по эксплуатации

Страница: 81 / 102

KAM-HD-MULTI—Instruction Manual 81
Kameleon HD Links and Web Pages
AES Outputs Web Page
Use
this
link
Use the AES Outputs web page to:
• Select audio streams to send to the available AES/EBU connectors des-
ignated as outputs on the rear module. The number of connectors avail-
able depends on the audio input/output configuration set on the I/O
Config web page (
I/O Config Web Page on page 43 ).
• Select the AES output resolution for each output with the
20 bit
or
24 bit
radio button.
• Enable or disable the AES C/U/V Bits Pass Through by selecting the
Enable checkbox. Refer to
AES C/U/V Bits Pass Through
on page 20 for an
overview of this control.
The AES Outputs web pages for each of the possible audio input and
output configurations are shown in the following figures:
• 8 inputs/0 outputs – in this configuration there are no AES output con-
nectors designated as shown in
Figure 48 on page 82 (First Set of Out-
puts) and Figure 49 on page 82 (Second Set of Outputs).
• 4 inputs/4 outputs – in this configuration there are four AES connectors
designated as outputs on the rear module. The output audio streams
available to these four outputs are shown in
Figure 50 on page 83 (First
Set of Outputs). The other four AES connectors are designated as inputs
and the web page for the Second Set of Outputs will appears as shown
in
Figure 51 on page 84 . The connectors for these outputs are illustrated
on the I/O Config web page and will depend on the type of rear
module installed.
• 0 inputs/8 outputs – in this configuration all of the AES connectors on
the rear module are designated as outputs.The output audio streams
available to these eight outputs are shown in
Figure 50 on page 83 (First
Set of Outputs). The list for the Second Set of Outputs is identical to the
First Set of Outputs. The connectors for these outputs are illustrated on
the I/O Config web page and will depend on the type of rear module
installed.