THOMSON Grass Valley KAM-HD-MULTI, Инструкция по эксплуатации

Страница: 43 / 102

KAM-HD-MULTI—Instruction Manual 43
Kameleon HD Links and Web Pages
I/O Config Web Page
Use
this
link
Use the I/O Config web page to:
• View a graphical overview of the rear module connectors,
• See signal status of inputs,
• Set audio input and output configuration, and
• Assign easily recognizable signal names that will help later in the con-
figuration process.
Num AES I/O Select
Use the radio buttons to select the audio input/output configuration for the
balanced or unbalanced audio.
The choices for audio inputs and outputs are the following:
• 8 In/0 Out – the balanced or unbalanced AES connectors all become audio
inputs ( Figure 20 on page 44 for unbalanced rear). This setting is auto-
matically selected when the Audio Preset Configs Embed button is
selected on the E-MEM web page.
•
4 In/4 Out
– balanced or unbalanced AES connectors all become audio
inputs ( Figure 21 on page 45 for unbalanced rear and Figure 22 on
page 45 for balanced rear). This setting is automatically selected when
the Audio Preset Configs
Universal 8 Ch
button is selected on the E-MEM
web page.
• 0 In/ 8 Out – the balanced or unbalanced AES connectors all become
audio outputs ( Figure 23 on page 46 ). This setting is automatically
selected when the Audio Preset Configs DeEmbed button is selected on
the E-MEM web page.
Header Row
The top header row provides the connector hardware physical label (J#)
and the dedicated signal type for the connector. This information is deter-
mined by the rear module type.
Connector
The connector row illustrates connector types provided for each port.
Input/Output Mode
The I/O mode is static read-only based on the type of module and the set-
tings made on the I/O Config web page.