Image Display
Image Display in the parameter settings allows the user to adjust how the pictures
are displayed on the screen.
The Image Display functions as follows:
ORIGINAL
This mode will cause your pictures to fit on the screen with no stretching or
cropping of the images. Photos with a typical 4:3 or 3:2 width-to-height ratio will
have black sections on the left and right sides of the screen.
OPTIMAL
This mode will cause your pictures to be enlarged to the full width of the screen,
without stretching them. As a result, the top and bottom of most pictures will
not be visible.
Language:
OSD language can be displayed in English, French, Italian, German, Dutch and
Spanish.
File Saving:
Photos must be saved in the JPG format in order to be viewed on the digital
picture frame. Nearly all digital cameras will save in this format by default.
Photos that have been saved with certain image editing programs can fail to
display properly.
5
Technical Notes:
1. Your digital picture frame is a sophisticated electronic device. Do not drop or
subject the unit to jarring or strong vibrations.
2. Avoid placing the digital photo frame in areas of high humidity or where it
might be subjected to splashing.
4. The LCD panel is made of plastic and can be easily damaged. Avoid sharp
objects.
5. Use only a soft dry cloth to clean the screen
Questions / Troubleshooting Guide
1.
Question: What kind of photos does this device support?
Answer: The frame will display digital photos that are stored in the JPEG
format, which is the standard format for nearly all digital cameras. Some
cameras allow images to be stored as TIFF or RAW files as well as JPEG.
Only the JPEG format is compatible with the frame. Photos of up to 10
million pixels can be displayed.
2.
Question: What should I do if the system does not respond when the power
is turned on?
Answer: Please make sure the unit is properly connected to a power source.
Then turn it off, re-connect the power and turn it on again.
3.
Question: Why is the memory card not recognized?
Answer: The memory card might be inserted backwards or is not pushed in
far enough. After inserting the memory card in the right direction, if the
card still cannot be read, please turn off the unit and then power it on again.
6
