Installation
B
asic connections
8
TV
DMR-DTH 7000 E
3
1
2
4
Scart cable
Coaxial Cable
Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN
socket of your DMR.
Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the
DMR to the
g
antenna socket of your TV set.
Using the Scart cable supplied, connect the DMR’s AV 1 socket (TV) to the scart socket
of your TV set (labelled AV 1, EXT 1, AUX 1 depending on the make).
Use the electric cable to connect your DMR to a mains socket, by first connecting the
cable to the back of the DMR.
Your DMR has many connection possibilities to allow it to fit into a setup comprising
several devices. We recommend that you follow the connection setup on this page, and
then carry out the adjustments shown on the following pages. You will first need to set
up the channels as explained in the following pages before the final interconnection of
the devices, described on pages 14 to 20.
1
2
3
4
220 - 240 V
50 - 60 Hz
DTH7000-EN 23/08/02 10:24 Page 8
