DFT-6300 Battery Load Bank Instruction Manual
22
4.3.2 Save to the U-disk
In the data management menu, press the [Save U-disk] option to transfer the data, and there will be a prompt after
the data is saved. Please plug in the U-disk first, and a green "U" symbol will appear in the upper right corner of
the menu after plugging in.
Note: U-disk read and writes error
a)
See if the U-disk is plugged in well.
b)
It is strongly recommended that users use the newly formatted (that is, empty) U-disk for read and write
operations, because U-disk many files may seriously affect the correctness of U-disk reading and writing. if
the reading and writing U-disk error, please reformat the U-disk and try again.
c)
Please insert the U-disk first, and wait until the prompt light of the U-disk is no longer flashing before other
operations.
d)
Do not plug in and unplug the U-disk while the U-disk is reading and writing,
e)
After the U-disk operation is completed, please wait until the prompt light of the U-disk is no longer flashing
before plugging in the U-disk.
f)
If there is an error in the process of reading and writing the U-disk or there is no response for a long time,
please format the U-disk with FAT again and try again;
4.3.3 Delete Data
In the Data Management menu, select the data, and press the Delete option to delete the selected data.
4.4. System settings
In the main menu, press "System Settings" to enter the system management interface, which includes 3 options of
language selection, Time settings and Upgrade as follows:
4.4.1 Time settings
Time-calibration function and the each operation results are synchronized with memory and display in the data
storage and results printing, so it is recommended to adjust the clock before using the tester operation to facilitate
the correct output synchronized with the detected data.
Adjust clock path: Main menu → System Settings → Clock Settings. The clock setting interface is shown in the
