EN-20
Cleaning the outlet HEPA filter
In order to guarantee the performance of the product, it is recommended to
clean it regularly and replace it after 3 to 6 months (depending on use). Press
and hold the dust bin release button, remove the housing, turn the cover,
remove the HEPA filter and dust off the HEPA filter.
If the dust accumulation is too great, wash it thoroughly and dry it before installing
it in the main case.
Motorized floor brush
It is recommended to clean the motorized floor brush every 4 to 5 uses. Put the
device
out
voltage
and remove
the electric brush.
To do this, turn the motori
z
ed floor brush over and open the locking button on the
fixed cover with a coin. (
Image
20) Remove the roller, by lifting one end of the
roller and then removing it
Image
21)
Use scissors
to remove the
hair, animal hair or other dust. (Image
22).
When cleaning is complete, push a
end of the roll
into the motorized floor brush,
then clip
the other extremity
.
(Image
23)
Put back
the
cover and
lock it.
Image 20
Image 21
Image 22
Image 23
When washing, use cold water and dry the filter thoroughly (usually in
sunlight for 24 hours, then put it back into the case.
