Selecting Tuner Band
1. Press
SOURCE
to enter Tuner mode.
2. Press
BAND/ INFO
to select between FM MW
or LW Radio band.
Tuning to a Station
Press
or
to select frequencies. Press
and hold
or
to scan frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
• Press
to toggle TUNE and PRESET
mode until “
Program”
lights on the display.
• Press
or
to access the previous or
next preset station.
Auto Preset Programming
(FM only)
Press and hold the
BAND/ INFO
button for 2
seconds to scan stations in FM band. The stations
will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is
automatic upon pressing the button. You can
stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press the
button to enter TUNE
mode.
2. Press or to access the desired
frequency.
3. Press the
PROG
button once and the most
recently accessed program location flashes on
the display.
4. If a different program location is preferred,
press
or
to move to the desired
preset number (1-32).
5. Press
PROG
to store the selected frequency at
that preset.
Suppressing Stereo Signal
Press
FM ST
to toggle between FM mono and
stereo mode. (Remote Only) “STEREO” is
displayed in stereo mode.
Radio
Tips:
Under
PRESET
mode, press or
can only acess the preset stations. Manaully
tuning is not accessible in this mode.
FM02
Program
91.10MHZ
FM
AUTO
P:02
91.10MHZ
EN
15
CS196 EN 17/2/06 7:29 PM Page 22
