Showing Demonstration
Press
DEMO/DIMMER
to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.
Setting the Clock
1. Press and hold
CLOCK
on the remote control
until the hour flashes on the display.
2. Press
or
to set the hour and then
press
CLOCK
to shift to minute digits.
3. Press
or
to set the minute.
4. Press
CLOCK
twice to save and quit settings.
Setting the Timer
1. Press and hold
TIMER
on the remote control
until Timer On and the clock hour flashes on
the display.
2. For setting time, press
or
to set the
hour and then press
TIMER
to shift to minute
digits.
3. Press
or
to set the minute.
4. Press
TIMER
to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press
TIMER
to select source. Press
or
to select TUNER / REC TUNER / DISC / USB /
PLAYER.
If TUNER REC is selected, press
or
to select the preset station.
6. Press
TIMER
to set volume. Adjust
VOLUME
CONTROL
to select desired volume level.
7. Press
TIMER
to save and quit settings.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release
TIMER
to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
ON
2:00
Settings
Note:
When system is ON, you can press
CLOCK
to display the current time for about 2
seconds.
OFF
0:00
VOL 10
PRE 01
EN
8
CS196 EN 17/2/06 7:28 PM Page 15
