720P WIFI IP CAMERA
EN 12
www.thomsonsecurity.eu
1
2
3
4
5
6
7
8
9
10
11
12
13
iOS
1
2
3
4
5
6
7
8
9
10
11
12
13
Android
1
Changing the password to log in
to the
camera (“admin”, by default)
2
Activation/deactivation and sensitivity of the
movement detector
3
Actions to take if movement
is detected:
notifi cation, send an email, saving a fi le to
the memory card (requires a micro SD card
[not included] to be inserted into the camera)
4
Activation/deactivation
of
continuous
recording to the micro SD card and the
length of videos (requires a micro SD card
[not included] to be inserted into the camera)
5
Volume of the microphone and
speaker
6
Video quality settings and number of
frames
per second. Warning: if you set the video
quality too high with respect to the quality of
the internet connection of your camera and
smartphone or tablet, you may experience
choppy video or loss of connection. Two
streams can be adjusted: they correspond to
the "
résolution Max
" (maximum resolution) and
"
résolution faible
" (low resolution), which you
can select from the live video display.
7
Confi gure the camera's current WiFi settings
8
If a micro SD card has been inserted into the
camera, you can reformat it and display its
total and free memory
9
Setting the date and time stamps
on the
camera's video
10
Settings for sending emails in the event
of an alert (see the example below)
11
Settings for saving to an FTP server
12
Remote camera restart
13
Camera network information
2.2 - Example: programming an email alert to
be sent when movement is detected
To program an alert to be sent when movement
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Confi guration depends on the
chosen email provider's settings.
D - CONFIGURATION
