13
EN
EN
www.mythomson.com
VIDEOPHONE SMART CONNECT
C - INSTALLATION
5 - INSTALLATION OF THE MAIN OR ADDITIONAL
INTERCOM PANEL
Note:
The product must not be connected to
the power supply before the wiring has been
completed.
GND
GND
• Remove the tamper-resistant screw under the
intercom panel.
• Tilt the intercom panel forwards.
1.60m
GND
GND
GND
• The lens of the intercom panel must be placed at
a height around 1.60m.
• Make guiding marks.
• Drill. Use wall plugs suitable for the nature of the
material (the wall plugs provided are suitable for
solid walls).
GND
GND
• Connect the two wires from the monitor and if
necessary, connect the electric strike plate and
the gate (see Section 1. Wiring).
• Check proper functioning (video call, etc.).
GND
• Place a silicone* seal between the shield and the
wall to avoid the infi ltration of water. *Do not use
acetic acid-based silicone (vinegar odour). It is
not recommended to run a silicone seal under
the intercom panel
6 - SMARTPHONE APPLICATION
6.1. Connecting a monitor to the WiFi
network
•
Download the Thomson Smart Connect
application onto your smartphone. From the
Apple store or Play store
•. On your monitor, go to the WiFi menu
