22
NOTE
:
1. The washing time may vary depending on the incoming water temperature and the
ambient temperature.
2. The power consumption in left-on mode is 0.49W (door open), in off-mode it is 0.45W.
Starting the Dishwasher
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
Ensure they are clean and properly positioned. See “Cleaning and maintenance”
section.
4. Check that there is rinse aid and salt.
5. Load the dishes.
Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into the dispenser according to the “Washing
Programmes” chart.
7. Press the power button to switch on the dishwasher.
8. Select the desired washing programme by repeatedly pressing
The corresponding programme indicator light will illuminate on the display.
Delay timer:
The delay timer allows you to delay the start of a washing programme
from 1 hour to a maximum of 24 hours.
Repeatedly press
until the desired start delay time is shown on the display, e.g.
H:03 for a 3-hour delay.
9. If you want to activate other functions, repeatedly press
until the
desired function indicator light illuminates.
+/
</>.
Once the delay timer has been set, close the door to activate the function.
To cancel the delayed start, open the door and then repeatedly press +/- until the
display shows "H:00".
